Hp Printer Error Code 60.2
Figure 20: Opening rear-output bin Remove the fuser by pushing up on the blue tabs and check for paper in the printer as well as in the fuser. Action Remove the printer from any UPS supplies, additional power supplies, or power strips. Check that all of the cables are connected to the HP Jetdirect card and that the HP Jetdirect card is seated properly. HP LASER PRINTER 5025MFP, 5035MFP ERROR 60.XX 1. have a peek here
Replace the D.C. Set High Speed to No and Advanced Functions to Off. To view Help for a message (if available), press (Help). Turn the printer power off, reseat the EIO accessory in slot [X], and then turn the printer power on. http://www.partsnow.com/news/ImagingNow/vol2iss1/clearing-error60-2_onhp
If possible, print to another network printer to verify the network is working correctly. The motor must operate the stack sensor within about 12 seconds, otherwise this error occurs. 60.X ERROR 60 Error from a LaserJet P4014 series printer is a problem with a tray If the message persists print a Configuration page and check the printer settings to determine which values have changed. (To print a Configuration page, open the Information menu at the printer Lift motor does not rotate; no lift occurs followed by 60.X Error.
Pressing the Select (check) button should clear the message. blog.marketpoint.com mainly on the error in the LJ-4200 series but applies to the P4014 and relatives. Attaches at the bottom and is so fun to reattach. Figure 26: Opening rear door Remove any paper found.
Its 50 cents from HP. Action NOTE: Press the ? (Help) button for detailed information about clearing the jam. Figure 19: Reinstalling the print cartridge and closing the top cover If a jam message persists, jammed paper is still jammed in the printer. http://www.copytechnet.com/forums/hp/27131-my-hp-4200-laser-printer-gives-me-60-2-error.html Do not tear the paper.
Action NOTE: Press the ? (help) button for detailed information about clearing the jam. On the right side of the stapler/stacker, turn the stapler unit toward the front of the printer until the unit clicks into the open position. If the problem persists, contact HP Customer Support. top 59.XY PRINTER ERROR For help press ?
Make sure that the paper is neatly stacked and that the paper guides are not too tight against the paper. navigate here To avoid minor burns, wait 30 minutes for the fuser to cool before removing it from the printer. Action If the incorrect size was selected, cancel the job or press the Help (?) button to gain access to help. Hope this helps.
After clearing all jams, send the print job again because the printer power has been turned off. http://permamatrix.net/hp-printer/hp-printer-error-code-41-2.html Action NOTE: Press the ? (Help) button for detailed information about clearing the jam. I had one last week where the lifting spring was totally missing. On Sale About Us Contact Us Order Status FREE TECH SUPPORT (877) 755-5300 Login My Cart (0) Printers Printer Supplies Printer Parts Printer Accessories Error Codes Our technicians can help you
X Description 2- air-temperature sensor 3- DC controller 4- power supply Action Turn the printer off and then on. HP LaserJet P3015dn Printer - Black/Silver - CE528APrice: $887.00 (129 customer reviews)63 used & new available from $139.99HP Laserjet Ent 600 M602N PrinterPrice: $1,699.99 (76 customer reviews)31 used & new Hold down Cancel Job while turning the printer power on. http://permamatrix.net/hp-printer/hp-printer-error-code-41-5.html If the error persists, turn the printer off.
Install new paper tray - 4250 version. I was able to use my existing spring and recoil the end. Try removing the paper from the afflicted tray and use just a few sheets.
Moved the stop up and problem solved.
top 57.X PRINTER ERROR To continue turn off then on Description A temporary printing error occurred in one of the printer fans. top 59.4 EP MOTOR ROTATION ERROR (HP LaserJet 4300 only) Description The print-cartridge drive motor (HP LaserJet 4300 only) is not functioning properly. This is an information only note.02: Paper Pick-up Assembly new service parts. It doesn't receive tray.
Turn the printer off and then turn the printer power on. Figure 34: Turning off and unplugging the printer Turn the printer so that its rear cover faces you. When this happens, you will typically first hear a loud grinding or popping sound followed by the error message.The 60.2 tray lift error is usually caused by improper paper installation. this contact form The paper in the paper tray is not lifting the media to the top.2..
Reply With Quote 12-04-2009 #6 Deano View Profile View Forum Posts Private Message Technician Join Date Oct 2009 Location St helier Posts 21 Post Thanks / Like Thanks (Given) 0 Thanks Action Remove any jammed media from the paper path. Hope this helps you. If you give me an information about my broken piece, I will buy a spare part on this website.
The error message is often preceded by grinding or even banging noises as the lift motor fails to engage properly and the paper tray rises a bit and then crashes back. alternates with 68.X PERMENANT STORAGE ERROR To continue press (Select) 68.X PERMANENT STORAGE FULL For help press ? See if the motor can be heard lifting the tray. top 50.4 FUSER ERROR Description The problem exists with the customer’s line voltage.
Action If the printer displays this error then please contact HP Support. CAUTION: Static electricity can damage DIMMs.