Home > Hp Officejet > Hp Officejet Pro K5400 Troubleshooting

Hp Officejet Pro K5400 Troubleshooting

Contents

First Time Here? If the product does not turn on by itself, press the Power button () to turn it on. Figure 57: Open the cartridge door Remove the cartridge indicated by the blinking light on the control panel. Step one: Check the estimated ink levels Follow these steps to check the estimated ink levels in HP Solution Center. have a peek here

Avoid printing on paper that is dusty. Wiping the ink nozzles can damage the printhead. Follow the on-screen instructions to order new cartridges or check cartridge compatibility with your printer. NOTE: Use a flashlight to thoroughly check the rollers and wheels for torn pieces of paper.

Hp Officejet Pro K5400 Troubleshooting

He said I needed to buy a new printer because the computer could no longer communicate with it. NOTE: You need to use 10 to 25 sheets of paper only for purposes of these troubleshooting steps. It's conceivable you might need to reseat one or two cartridges, but sounds to me like you are seeing problems with all colors, which makes me think something more systemic is I went out and bought another new cartridge and the ink cartridge went out.

If the issue persists, continue to the next solution. Wait until the warm-up period completes before continuing.Open the top cover. Press the Power button () to turn on the product. Press down firmly on the printhead to make sure that there is proper contact.

Close the printhead latch. Hp Officejet Pro K5400 Clean Print Heads Reconnect the power cord to the rear of the product. Learn more You're viewing YouTube in German. her latest blog Figure : Insert the cartridge and close the cartridge door Issue: The Power light blinks and one or more Print Cartridge lights are on In this error condition, the following light

Great performance.I am running Windows 7 and Office 2010.About 2 weeks ago I started getting lousy print quality. Wiedergabeliste Warteschlange __count__/__total__ Fixing a Carriage Jam - HP Officejet Pro K5400 Printer justprintingaround AbonnierenAbonniertAbo beenden3.8493 Tsd. Carefully remove any jammed paper or obstructions found. Step one: Reset the printer Press the Power button () to turn on the product.

Hp Officejet Pro K5400 Clean Print Heads

Solutions Follow these solutions in the order presented to resolve the issue. http://h30434.www3.hp.com/t5/Inkjet-Printing/Officejet-Pro-K5400/td-p/4402544 Wiping the ink nozzles can damage the printhead. Hp Officejet Pro K5400 Troubleshooting First Time Here? Hp Officejet Pro K5400 Manual Search the Community Entire ForumThis CategoryThis BoardUsers turn on suggested results Auto-suggest helps you quickly narrow down your search results by suggesting

Step three: Clear the paper jam from the front of the printer Lift the output tray. navigate here Then after those cleanings, do a hard reset again. Press the button on the paper width guide, and then push the guide in until it rests against the paper. I reinstalled the original new cartridge and the ink light started to blink again.

Video of fixing an 'Out of Paper' error message The following video demonstrates the steps on this page. Hopefully chat with you again after reboot with results of deleting this pending doc. Remove the duplexer. Check This Out If the issue persists, continue with the next solution.

Step one: Check for missing cartridges Open the cartridge door, and then check if one or both of the cartridges are missing. If any torn pieces of paper remain inside the duplexer, more jams are likely to occur. WiedergabelisteWarteschlangeWiedergabelisteWarteschlange Alle entfernenBeenden Wird geladen...

The owner's manual indicates that the ink cartridge is out of ink and I know it is not true since it is a brand new cartridge that did register as a

Apply a moderate amount of pressure to remove dust or dirt buildup. When a cartridge is low on ink, consider having a replacement cartridge available to avoid possible printing delays. Figure 67: Insert the cartridge and close the cartridge door If these steps resolved the issue, you do not need to continue troubleshooting. If the issue persists, continue with the next solution.

If any torn pieces of paper remain inside the product, more jams are likely to occur. Reply 0 0 PattiD Top Student Posts: 7 Member Since: ‎08-27-2014 Message 9 of 14 (451 Views) Report Inappropriate Content Re: Officejet Pro K5400 Options Mark as New Bookmark Subscribe Subscribe caution: Do not shake the printheads after you remove the caps. http://permamatrix.net/hp-officejet/hp-officejet-pro-k5400-blinking-light.html File this solution in your archives as it will pop up again with someone else.