Home > Hp Officejet > Hp Officejet Pro 8500 Paper Jam Clicking Sound

Hp Officejet Pro 8500 Paper Jam Clicking Sound

Contents

Do not print on paper with paper clips or staples attached. by moe on Oct 13, 2011 at 3:43pm Add comment Please sign in to comment 0 I have an OfficeJet 8500 Pro with the same symptom. Be firm but don't force it. Close the duplexer cover. have a peek here

If the issue persists, continue to the next solution. Clear jam and then press OK". Press the Power button to turn off the printer. Do not use paper that is bent, torn, dusty, damp, wrinkled, curled, or paper that does not lie flat.

Hp Officejet Pro 8500 Paper Jam Clicking Sound

Disconnect the power cord from the rear of the printer. Support Forum Join the conversation! If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting. Experiencing frequent or recurring paper jams?

Turn the printer around so that you can access the rear side. Okidata was much more accommodating when I had to call them recently for my out of warranty printer. My problem is it is not reading on the right side but others may have had that problem on the left side (which is why I think there is two sensors) Hp Officejet Pro 8500 Carriage Jam It displays a paper jam and the carriage hangs out on the left side.

Assuming I fix the white/black clutch mechanism, is this black cover necessary for the printer to work? The carriage should move to the printhead access area (compartment 1) on the far left side of the printer. Figure : Close the carriage access door Reconnect the power cord to the rear of the product. letter or A4 size, unused, plain, white paper into the input tray.

Then shut it off again, unplug it again, and then open the main cover again. Hp Officejet Pro 8600 Paper Feed Problem note: Paper jams can be real or false. Thanks. I decided to test it out, since it was the first new suggestion I'd come across.

Hp Officejet Pro 8500 Broken Gear

If you completed all the preceding steps and your product still has an issue, service the product. Disconnect the power cord from the rear of the printer. Hp Officejet Pro 8500 Paper Jam Clicking Sound If the product does not turn on by itself, press the Power button () to turn it on. Hp 8500 Paper Jam But No Paper Z7_3054ICK0KGTE30AQO5O3KA30N0 hp-concentra-wrapper-portlet Actions ${title} Loading...

If you completed all the preceding steps and your product still has an issue, service the product. navigate here Step one: Check compartments 1 and 2 If the printer is not turned off, press the Power button to turn off the printer. Modify your browser's settings to allow Javascript to execute. It pulls gently out - look for tabs. Hp Officejet Pro 8600 Paper Jam Error But No Paper Jam

There are multiple compartments in the printer where paper can jam. The printer lights might flash and the carriage might move. Pick a manufacturer, any manufacturer and they're all guilty of the same philosophy. http://permamatrix.net/hp-officejet/hp-officejet-pro-8500-fax-error-344.html Thank you! Register ยท Log In HP Support Forum Home > Printers > Inkjet > Officejet Pro 8500 paper jam error HP Support Forums Join in the conversation.

Wait until the warm-up period finishes before you proceed. Hp Officejet Pro 8600 Plus Adf Paper Jam The printer lights might flash and the carriage might move. Use the paper clip, toothpick or any appropriate edged tool to clear theshards.

I read all of the comments and sense that the root cause of the problem may be loss of lubrication (either by accumulation of foriegn particles between shaft and cog or

It should not be down unless it is picking up paper. by Futureboy on Jan 3, 2012 at 6:16pm Add comment Please sign in to comment 0 Onthe left side of the scanner first remove back and then left cover.then its easyer Press the Setup button (). Hp Officejet Pro 8600 Paper Jam In Scanner I inserted new cartridges and the error msg was resolved and e'thing seems to be normal.Wish I understood these thing better --G100 the GEEK by unknown on Apr 11, 2012 at

working on it now and will post the results. All four wires should be set inside the hook, but likely they are loose. 11. You might have to apply some pressure to engage the latch. this contact form jk....

Press the Power button () to turn on the product. But I work on it, then get frustrated and post, then work on it, then post. If you are experiencing problems with certain paper types or sizes, see the Product Specifications to ensure that your printer supports other sizes and types of paper. That my friend is how the printer knows where the print head is down to the little gap between those little lines.

Complementary Content IBM WebSphere Portal Home IBM Logo Sign Up Log In Welcome Getting Started Contact HP - Anonymous Contact HP Product Context View Support Home Test page Product Home Product The self-test report prints. Pulling too hard on jammed paper can damage the print mechanism. The rest was a matter of poking around with screwdrivers and things to get everything into the right place.

Use both hands to pull any whole sheets of paper to avoid tearing them. It may make the problem go away for a while but you're best to use a real lubricant like household oil or even triflow if you have it. Now you want to make sure YOU TURN THE POWER OFF to the machine and it is UNPLUGGED. If you can pull it from the rear of the printer or the tray, always try the rear first.

Do not use paper that is bent, torn, dusty, damp, wrinkled, curled, or paper that does not lie flat. Disconnect the power cord from the rear of the printer. On the printer touch screen, touch the Right Arrow () to display the second navigation screen. Reconnect the power cord to the rear of the product.

It statred a week ago while printing a document. If you have any info on the proper steps to disassembling the printer, please let me know.Thanks - unknown I found the problem with the "Virtual Paper jam" issue!!! Duh.2) hard reset the printer (pull power cord when the printer is on. The reason the black & white teeth do not engage with eachother is because when the white gear separates it leaves one notch skinnier & the black tooth can't slide into

See the documentation that came with the HP product for more information. HP Customer Support Support Home Products Software and Drivers Forums Contact Support Search Select your Model Let HP find my products Identify now HP can identify most HP products and recommend