Home > Hp Laserjet > Hp Laserjet 2500 Error Lights

Hp Laserjet 2500 Error Lights

To understand the secondary light pattern, do one of the following: Press and hold (GO) and (CANCEL JOB) simultaneously. Imaging drum is a non-HP imaging drum (Error 10.30.00) Light pattern Description The imaging-drum light is blinking and the Attention light is on. The printer stops printing. Remove the DIMM and reinstall it to ensure that it is correctly installed. http://permamatrix.net/hp-laserjet/hp-laserjet-2200d-all-three-lights-on.html

Action Pressing (CANCEL JOB) cancels the current job. While pressing (GO) and (CANCEL JOB) simultaneously, the Attention light, Ready light, and Go light are blinking. i pressed the go button and nothing happens. If the print-cartridge light is still blinking but the Attention light is not on, turn the printer off and then back on again. go to this web-site

I have also done a cold reset on the printer. The printer stops printing. If the printer receives a 13.21.00 error, reseat the fuser and firmly close the blue latches.

They will have the form 41.X.0 in other reporting areas. Missing or incorrectly installed memory Light pattern (CLJ2500 only) Description The Attention light and Ready light are on and the Go light is blinking. To print the manual completely, please, download it. If the printer receives a 13.01.00 error, verify paper is correctly loaded, then open, and close the top cover.

If the correct size is loaded, press If printing does not resume, open the top cover, remove the imaging drum, and check for a jam inside the printer. All 3 lights steady primary and no lights secondary is for an incorrectly installed or faulty toner.cartridge. I do not know muchof the history on this machine, but believe the carts to be almostnew and they did print pages. More Bonuses No indication from the printer Supplies Status lights, the Supplies Status page, or any software component (Toolbox, Printer Status and Alerts, or Color LaserJet 2500 embedded Web server) will be received

We do not sell these spare parts.We help you to create your parts sheets to request from your suppliers. Secondary light patterns provide more information about the more specific type of error that occurred. Action CAUTION: Turn off the printer before inserting or removing DIMMs to avoid damaging them. The configuration page or the toolbox may display one of the following numeric error codes: 13.01.00 = Paper feed 1, paper late jam 13.02.00 = Paper feed 1, paper stopped jam

The printer continues to print without any action required until the print cartridge is empty. http://printcopy.info/?l=en&mod=erc&brand=HP&model=Color%20LaserJet%202500 Yellow print cartridge is empty or missing (Error 10.00.03 or 10.10.03) Light pattern Description The yellow print-cartridge light is blinking and the printer stops printing. The engine test prints very nicely. No movement of the carousel.

The printer stops printing. http://permamatrix.net/hp-laserjet/hp-laserjet-p2035-error-lights.html Change product Choose from all HP products Enter product serial number Please wait while we process your request. If the correct size is loaded, press (GO). Action Turn the printer off for approximately 20 to 30 minutes, and then turn the printer back on.

Action No action is needed. While pressing (GO) and (CANCEL JOB) simultaneously, the Attention light is on. CAUTION: Continuing to print once this print cartridge is empty can damage the printer. Check This Out To understand the secondary light pattern, do one of the following: Press and hold (GO) and (CANCEL JOB) simultaneously.

Action Reseat or replace the memory DIMM in the unit. Each of these errors has its own set of secondary light patterns, so a section is included here for each set. The printer stops printing.

The 3 lights are the attention light, the ready light, & the Go light.

Check the connection to ensure that it is secure. If the printer is out of paper, load paper. If unsuccessful, the printer continues to display the Attention with Ability to Continue state. To continue printing remove the DIMM from DIMM Slot 3.

I thought that wouldmake all the difference, but it did not.I have ordered a new toner reset chip to see if this will be detected better than the chip on the Change the contents of the old list and save it as new. Ask Colin Vincent Your Own Question Colin Vincent, Engineer Category: Printers Satisfied Customers: 1544 Experience: City of Guilds 224, Kyocera, IBM, Novell certifications. 24 years IT experience. 29964247 Type Your Printers http://permamatrix.net/hp-laserjet/hp-laserjet-1200-error-lights.html Interaction state Light pattern Description The Go light is blinking.

Sign up! With a service error if you press and hold the cancel and go button together it will give you a secondary error light pattern which will indicate the likely failing item. Turn the printer off and then back on. 52.x Scanner error Light pattern Description Initially, the Attention light, Ready light, and Go light are on. The printer received data and is waiting for a form feed.

The connection between the printer and the computer might be loose. All of my ink cartridges are full - they are in the right place ( thanks in part to your last advice) but I can't get the Printer to even accept There is a problem with the DIMM in this DIMM slot. The page that contains the error will automatically be reprinted.2 Turn the printer off and then back on.3 Replace the laser/scanner.52.x Scanner errorThe Ready light is on.1 Press GO.

Action In order to use this non-HP print cartridge, press (CANCEL JOB) to continue printing. The message appears in these situations: Manual feed with pause. Use the embedded Web server on the Color LaserJet 2500 printer for a text message that correlates to the light pattern. Remove the DIMM and reinstall it to ensure that it is correctly installed.

I believe it means there is a motor error, but not sure what to check for now. Cyan print cartridge low Light pattern Description The cyan print-cartridge light is on. Action Turn the printer off and then back on. 64 Scan buffer error Light pattern Description Initially, the Attention light, Ready light, and Go light are on. When I shut off the printer, whether for a few seconds or a half hour (even unplugged), the same thing happens, except that on initial startup, all the lights (all 8)