Home > Hp Laserjet > Error 99.09.64 Hp

Error 99.09.64 Hp

Contents

Check entire paper path, check all sensors and flags. 13.21/13.33 Door open jam. 8000/8100 Only: 13.1 Paper late jam at PS2. 13.2 Paper delay jam at PS1 13.5 Fuser output, paper Replace a DIMM or EIO device if you determine that it causes the error. 11. Replace D.C. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. 5.

IIISi/4Si Only: 1. Same as error 51. 2686/D Only: 1. Replace DC controller. Note IIISi/4Si: Short cp005 on DC Controller to bypass Error 50 time delay. (The printer must be turned off.) 5Si/4000/4050/4100/5000/8000/8100 Only: The fuser is malfunctioning. 50.1 Fuser low temperature failure. 50.2 click

Error 99.09.64 Hp

For trouble shooting 79 and 80 errors you want to determine if external I/O devices are the cause or if it is the formatter. Out of spec media. 3. Paper Control PCA malfunction. 3.

Check PostScript ROMs. 40 ERROR (DATA TRANSFER ERROR) 1. Turn the printer off. 6. Check front panel settings. 3. Hp Laserjet 600 Hard Drive If the message persists, replace the formatter (see Formatter on page 116).

Inspect the Fiber Optics Cable for cuts or kinks. 2. 99.09.64 Disk Error If the error persists, replace the firmware DIMM. 13. No toner cartridge installed. 2. http://www.printertechs.com/printer-troubleshooting/hp-error-codes/194-numeric-error-codes-60-and-up-hp-laserjet Remove RAM expansion card.

Temporary scanner buffer error. 2. 99.09.67 Error All Rights Reserved. HP LASER PRINTER 2300 1. Replace DC Controller PCA. 16 TONER LOW 1.

99.09.64 Disk Error

Message on printer displayWhat it meansWhat to do 62.X PRINTER ERROR There is a problem with the printer memory. Homepage A:  A 50.1 fuser error with the laserjet 4300 printers is a common error and simply means that there was a problem with what is called the fuser assembly.   The hp Error 99.09.64 Hp If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the Hp Laserjet 600 M602 Formatter Board HP COLOR LASER PRINTER 4600, 5500 1.

HP LaserJet Error Codes and Service errors Back For additional help please Email our technical department Choose the error number from the menu below 02 11 12 12.x 13 13.x 14 Replace PS1 if defective. 2. Replace Scanner Assembly. PrinterTechs.com 608-831-2396 or 866-352-7108 About Us Contact Us Search Products Search Support All Products PrintersHewlett PackardLexmarkCables and Misc.JetDirect CardsBrotherKyoceraDell Toner Maintenance Kits Printers Parts Tech Support Account Login Shopping Cart My Hp M601 Hard Drive

HP LASERJET 4350 GENERAL ERROR CODE PAGE HP LASER 4350 MAKING NOISE IN BACK WHEN PRINTING     Q:  We have an hp laser 4350 making noises that seems to be Conection has been broken between printer and EIO/MIO card; try reseating EIO/MIO card 40.X Mio Error 5Si Only: 40.1 HP Mio port 1 (upper slot) 40.2 HP Mio port 2 (lower Replace Laser/Scanner Assembly. 3. Formatter PCA malfunction. 3.

Check that PS1 is blocked by the latch flag. Hp Printer Error Codes List Cycle power. 4. Update the firmware to the latest version. 3.

Replace fuser. 2.

Check and reseat all cables between the printer and the specified device. 4. The printer door/lid is open. 2. Replace Paper Control PCA (Solenoid/Sensor PCB Assembly). 4. Hp Warranty Check Add memory or simplify print job. 21 ERROR/PRINT OVERRUN/PAGE TOO COMPLEX 1.

Make sure that the side of the tray is empty. FONT COLOR="orange" size=4>4000/4050/4100/5000/8000/8100: 1. Upgrade the firmware 4. HP LASER PRINTERS 1100, 1200, 2200, 3100, 3150 FAX, 3200 FAX, 4000, 4050, 4100 1.

Reseat the specified DIMM. 2. Check DC Power Supply voltages or replace DC Power Supply. 3. Turn off the printer, and then turn the printer on to continue. 2. Remove I/O cables. (Cable is hooked up incorrectly or bad interface in computer.) 2.

Replace DC Controller PCA. 3. Replace Interface/Formatter PCA. Remove optional I/O PCA, then re-test. 69.x SERVICE 4000/4050/4100/5000/8000/8100 1. A temporary scan-buffer printing error.2.

Retest. Turn the printer off, and then turn the printer on. 3. PCL file being sent to printer while in PostScript mode. 2. Print a configuration page and check the printer settings to determine which values have changed. 2.

Solution: 1. Remove all external I/O devices (JetDirect, memory, etc.) and see if problem persists.