Home > Hp Laserjet > 53.10.03 Hp Printer

53.10.03 Hp Printer


Even after the cartridge is refilled, the printer display will still show “Toner Low” for the supplies status section of the menu. As these machines had just been released at the time of this writing, no information on the chip function or reset if needed is available. The same fuse is used in the F-3010 OPC Cartridge. 16. 16 Kyocera F-3010 OPC Kyocera OPC Part # DK-2 OEM Stated Yield: 10,000 There is a small black fuse located The Standard cartridges can be re-manufactured as much as you want, the chip will not interfere. http://permamatrix.net/hp-laserjet/hp-printer-symbols.html

These cartridges also have windows that work with an optical sensor inside the printer that determines if the waste chamber is full or not. Gift Certificates My Account Sign in or Create an account Currency Displayed in Quick Order Form View Cart (0) Toggle Top Menu Toner Cartridge Direct Search Search Main Navigation Home Pages This fuse must be replaced each cycle by un-soldering the old and soldering in the new. The machine model numbers are also in a slightly smaller point size.

53.10.03 Hp Printer

After the OEM toner has been used up, the “toner low reached” code will be set to YES on the cartridge chip. Okidata C5100 Series Okidata OPC Color Cartridge Part # 42126604, 42126603, 42126602, 42126601 OEM Stated Yield: 15,000 All These machines have a glass fuse that is used to reset the machine. Replacement sheets are now available. The counter is reset!

byKayla Forro 8views Share SlideShare Facebook Twitter LinkedIn Google+ Email Email sent successfully! DEX 625 (Samsung SF-5500) Dex Cartridge Part # 6950 OEM Stated Yield: 12,000 This cartridge is actually two separate cartridges, a toner and a drum cartridge. HP LaserJet 4250/4350 HP Part # Q5942A/X OEM Stated Yield: 10,000/20,000 The HP-4250/4350 uses the second generation black toner cartridge ARD’s. Hp Laserjet 4100 Driver The main display will then show “Non HP Toner cartridge”.

HP Color LaserJet 4700 HP Black # Q5950A, Cyan Q5951A, Magenta Q5953A, Yellow Q5952A OEM Stated Toner Yield: 11,000 Black, 10,000 Color These cartridges have what HP now calls “Smart Print Hp Laserjet 4100 Error Codes E238 Drum units: With the printer turned on and in the READY state, open the front cover. The display will read "DRUM COUNT RESET RESETTING", then "INITIALIZING", then "WARMING UP", and finally "ON LINE". check it out They are very static sensitive.

Make sure you have the correct ones. Unlike other Lexmark chips, the board for these cartridges has two contact pads where the machine makes direct contact. Check if the address is correct. It would seem that HP or Canon has plans to recycle these cartridges.

Hp Laserjet 4100 Error Codes

Be careful to reset this tab after testing, as it will automatically move to the inner notch every time the cartridge is installed. HP Color LaserJet 3600 HP Black # Q6470A, Cyan Q6471A, Magenta Q6473A, Yellow Q6472A OEM Stated Toner Yield: 6000 Black, 4000 Color These cartridges have what HP now calls “Smart Print 53.10.03 Hp Printer Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers Hp Laserjet 4100 Not Printing So far we have seen Lexmark, Epson, and IBM machines using these cartridges.

These cartridges can be re- manufactured as much as you want, the chip will not interfere. http://permamatrix.net/hp-laserjet/77d4-printer-error.html Run a self-test. Check with your supplier for more information. This occurs on the 4250 Printer only when the cartridge is first installed Pressing the "Check" button will clear the message and allow normal printing HP LaserJet 4300 HP Part # Hp Laserjet 4100 Manual

Respond to this 0 Does "is still not working" mean that you are still getting the same 53 error code? Fuji-Xerox XP-11 Toner & OPC (Xerox 4030) Xerox Part #’s 6R281/13R32 OEM Stated Yield: 20,000 With the printer off, press and hold the reset button located next to the power cord. You will hear a slight grinding. Check This Out There is a possibility that there is developer inside the drum cartridge.

HP Color LaserJet 4500 (Canon LBP-83X) HP-4500 General Note: If the transfer belt kit or Fuser is replaced before the change fuser/transfer messages are displayed, placing a new part in the Press and hold the ENTER key for 3 seconds, when you release it you should see "Administration" on the display. The code however for these cartridges is different from the others.

This sheet is also present in the DR- 300 cartridges.

Press the “CLEAR” button to show the drum status. These machines share the same black cartridge as the CLJ 3500. On the Non-Prebate cartridges however, the chip is also present, but the killer part is not active. 21. 21 Lexmark T620/622 Lexmark Cartridge Part # 12A6760/12A6860 12A6765/12A6865 OEM Stated Yield: 6760/6860 These cartridges have a reset chip built into the connector.

In both cases, the chips use the new “Overdrive code”. Hold them until the Ready (green) and Error (red) lights turn on. If not, ideas welcomeThanks in advance DS Respond to this 0 Since the 49 error is a firmware error, lets try to narrow things down. this contact form by Anonymous on Sep 26, 2007 at 4:32am Add comment Please sign in to comment 0 Thanks for the info given in this thread.

Press SELECT 1x until the display shows “Factory defaults”. Click on OK, the printer is reset. If the chip is removed, the toner low sensors will be disabled, and will not work again until a new HP cartridge is installed. Unlike the 4100, the chips need to be replaced every cycle.

If the chip is removed, the toner low sensors will be disabled, and will not work again until a new HP cartridge is installed.. Press and hold the CANCEL button until all the lights begin flashing up and down. These are the latest in HP chips, they are very small, and contain all new code. These chips (ARD’s) only monitor toner usage not page counts.

Press the MENU button until MAINTENANCE MENU is displayed, then press the SELECT button. They even eliminated the Yield Wheel! This procedure should be done every time the cartridge is replaced: Hold down the "A" (Automatic Exposure) key for approximately four (4) seconds or longer. Troubleshoot a problem Software and drivers (22) Windows (9) Macintosh (11) Other (Unix, Linux, Novell, etc.) (2) Installation and configuration issues (8) Printing (2) Windows (4) Other (Unix, Linux, Novell, etc.)

These chips (ARD’s) only monitor toner usage not page counts. Enter the PCU Diagnostic mode by turning the printer off and holding down the MENU and OK buttons on power up. (Release the buttons once you are in the PCU DIAG The chip does not need to be replaced, but if it is not, “Unauthorized cartridge” will show on the display. Mita LDC-650 Mita Cartridge Part # 63582010, Pitney Bowes Part # 9640 OEM Stated Yield: 10,000 On the gear side of the cartridge there is a large white gear with a

These chips are physically located in a different spot from the older Optra T cartridges. Laser Printers Open the front cover. Common HP Chip/Machine Error Codes “10.00.00” If this is displayed, it means the printer is having problems communicating with the chip on the cartridge.