Hp Error Code 59.90
View Solution. The printer will cycle itself down and restore all factory settings. controller board. Make sure you do not overfill the tray. https://h30434.www3.hp.com/t5/LaserJet-Printing/Printer-Color-Laser-Jet-4650-Error-59-90/td-p/5443304
Apparently the spring in the arm warped the interior surface where the head moves and it can't line up when it's closed. Turn the printer off, then on. Please keep us updated and remember to rate this answer. Tray2 An error has been detected in your printer's Tray2.187 I/F Error, Loc.
Verify if the shutter tab on the cartridge is broken or damaged. After reading the above suggestion, I went to component test, selected test the cartridge motors, removed all the cartridges even though it said to remove one. If you think you have received a fake HP Support message, please report it to us by clicking on the blue “Report Inappropriate Content” button above the message. Sep 14, 2012 | OKI C5500n Printer 2 Answers Laser scanner unit error.
Try the DIMM in another slot. (The firmware DIMM must remain in slot #4—the lowest DIMM slot.) 3. Turn the printer off, then on. Check for paper under the Upper Tray. useful reference Replace the Main Charge Grid.
for more help visit https://cbrtechsolutions.net Sep 29, 2012 | Kodak Esp 5210 Inkjet All-in-one... 1 Answer Error 163 on oki c5500 printer 163 Toner Sensor Error, Color: Black An error has I have 2 errors that show up on the printer. If the problem is not related to the fuser, replace the engine controller board. 50.4 PRINTER ERROR A problem exists with the customer’s line voltage. 1. The .9 = ETB startup motor. .X 0 = no color.
Check the power at the customer’s location. 2. http://www.fixyourownprinter.com/posts/37180 Turn the printer off, wait 10 minutes, and then turn the printer on. 2. Solution: 1. Tip: The max point reward for answering a question is 15. 0 characters Video Photos Link Replacement Parts Add Upload Upload × × Draw a box over the problem!!
Shutter tab on the print cartridge 1 - Shutter Tab Replace the cartridge if damaged. navigate here Replace the Imaging Unit (make sure that Imaging Unit is locked in place). X Description: 0 motor error 1 motor startup error 2 motor rotation error 3 fuser motor startup error 4 fuser motor rotation error 5 print cartridge motor startup error 6 print Control Pnale An error has been detected in your printer's Control Panel.190 System Memory Overflow An error has been detected in your printer's System Memory Overflow.191 Page Memory Overflow An error
Remove and re-install each of the Toner Cartridges. Faulty DC controller PCB Action: Replace the DC controller PCB. it should now show on, use the right arrow once to change it to off and hit enter 2 times let the printer reboot and its should be fixed Posted on Check This Out Turn the printer off, then on.
Power of system and power back on.2. Reply 0 0 SHThompson Distinguished Professor Posts: 2,711 Member Since: 05-09-2011 Message 4 of 7 (2,503 Views) Report Inappropriate Content Re: Printer Color Laser Jet 4650 Error 59.90 Options Mark as solution..
Replace the Imaging Unit.
Wait 30 seconds to allow the printer to reset. Replace the engine controller board. 5. Turn the printer off, then on. Replace the environmental thermistor. 4.
It's about 18 months old. X description: 1 = Beam-detect error 2 = Laser error 1. by unknown on Nov 9, 2006 at 3:43pm Add comment Please sign in to comment 0 The ETB test is to determine if the motor is running.The fact that it started this contact form Replace the Transfer Kit.