Home > Hp Deskjet > Hp Deskjet 960c Error Messages

Hp Deskjet 960c Error Messages

Unhook the Printer Cable from the back of the printer, but leave the Power Cord still plugged into the wall. so i got a new one..when i put it in the X button(with the pic of an ink cartridge with a water drop inside it) began to flash. The difficulty of getting "DOS" printers is what's going gto completely kill the use of DOS apps, IMO. Simply read the information, make your choices and follow the prompts to download new drivers for free. Source

If that fails to solve the problem uninstall and reinstall the printer driver. Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers Soak the nozzle area on the cartridge in about 1/2" of near boiling water. Disconnect the power cord from the rear of the product. http://h20564.www2.hp.com/portal/site/hpsc/public/psi/troubleshootResults?sp4ts.oid=28175

Choose 3.5 floppy A:\. You should be able to run the HP DeskJet Control Panel for DOS by accessing a DOS prompt, typing DJCP, and then pressing ENTER. Remove any loose paper or obstructions found.

Step two: Align the cartridges Follow these steps to align the cartridges. Cause: There is a problem with the black cartridge. Press the Resume button () to continue printing. Windows Vista Click the Windows icon (), click All Programs, click HP, click the folder for your HP product, and then click the icon for your HP product.

If the issue persists, continue with the next solution. my problem is that when i go to the option "print" a message is diplayed "top cover is open" and then my print is aborted. Step three: Print a self-test report Print a self-test report to make sure that the hardware functions correctly. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=bud09170 Option one: Print a self-test report from the control panel Press and hold the Power button ().

Plug the power cord back into the wall outlet. Press the Power button () to turn on the product. Open the cover on the product. The self-test report prints.

Unplug the power cord from the power source or electrical outlet. Please let us know if this works, because if it does, I've got a workaround that you can try. Select Ultra Safe Mode from the list displayed. I am using Windows 98.

How to print a self-test report Choose one of the following options to print a self-test report. this contact form This time, the cotton swab was quite clean.)Per the pg. 51 figure, the arrow on my printer pointed to the cartridge with the single dot. The self-test report prints. HP Deskjet 900c series printers Click Start, Programs, click HP Deskjet 990C printer and then click HP Deskjet 990c series toolbox.

While holding the Power button, press the Resume button () four times. Solution five: Service the printer If you have completed all the steps listed above and are still experiencing a problem, continue to the Service the printer section at the end of The printer setup utility lists 5 960c's none of which when highlighted also highlights the utility icon. have a peek here Trying to clear jammed paper from the front of the product can damage the print mechanism.

I guess my boss will have to find a printer that works with this and good luck to her. The carriage moves into the access area. Unplug the power cord from the wall outlet.

Put the HP DeskJet 900C Series Printer Software CD into the CD-ROM drive. 2.

Slide the cartridge into its slot, and then press it toward the back of the product until it locks into place. So, to resolve all these sorts of PC problems, you should follow a logical process. If the test page does not print, continue with the next solution. The product could not be added to your profile at this time.

I'll contact Asus to see what they can do for me. Use an upward motion, from the nozzle end to the top of the cartridge and wipe the copper-colored strip on the back of the cartridge with the dry cloth. Figure 6: Release the rear access door Pull the door toward you to remove it. Check This Out One Black and one Color.

Insert the disk you made into the floppy drive. 2. Insert the disk you made into the floppy drive. 2. Error message states that there is 'a system failure, re-install printer drivers'. Solution five: Perform a power reset Follow these steps to reset the product.

Method two: Remove the duplexer to clear the paper jam from the rear of the printer Press the Power button () to turn off the product. At the C:\WINDOWS> prompt, type CD\ and press ENTER. 4. The Power light, the Resume light and the Cartridge lights blink alternately The following light pattern displays on the product control panel: Cartridge light: Blinking Resume light: Blinking Power light: Blinking Step five: Print a self-test report Print a self-test report to make sure that the hardware functions correctly.

The self-test report prints. Release the Power button ().