Home > Hp Deskjet > Hp Deskjet 6980 Troubleshooting Guide

Hp Deskjet 6980 Troubleshooting Guide

Contents

Clean cotton swabs or any soft, lint-free material that will not stick to the cartridges (coffee filters work well). Allow the contacts to dry for approximately 10 minutes, or use a new swab to dry the contacts. Press the Power button () to turn on the product. Rebecca Kahl 1,393 views 1:08 Adding an HP Printer to a Wireless Network - Duration: 7:02. Source

Always clear jammed paper from the back of the product first, and then from the front. Tyler Miller 39,318 views 4:32 HP DeskJet 6980 -- A Printer That Deliverss - Duration: 3:24. Figure 63: Remove the cartridge CAUTION: Do not remove both cartridges at the same time. See Printing with a single print cartridge.

Hp Deskjet 6980 Troubleshooting Guide

The diagnostic page prints. Figure : Unhook the cartridge latch Slide the cartridge out of its slot. If the test page does not print, continue with the next solution. Unplug the power cord from the wall outlet.

If the power cord is not disconnected, disconnect it now. Press the Power button () to turn on the product, if it is not already on. Service station stall.Open the top cover and unplug the power cord. Hp Deskjet 6980 Clean Print Head Carefully pull the pink pull tab to remove the plastic tape on the cartridge.

If the issue persists, continue with the next solution. Hp Deskjet 6980 Power And Resume Lights Blinking Method one: Clear the jam through the rear access door Press the Power button (< IBM WebSphere Portal Home IBM Logo Sign Up Log In Welcome Getting Started Contact HP - If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting. http://h30434.www3.hp.com/t5/LaserJet-Printing/DJ-6980-ink-lights-are-blinking-even-with-new-cartdriges/td-p/3607 Solution one: Remove, inspect, and reinsert the cartridges The cartridge might not have full electrical contact with the product.

Allow the contacts to dry for approximately 10 minutes, or use a new swab to dry the contacts. Hp 6980 Ink Light Flashing by Bert on Apr 11, 2008 at 9:34pm Add comment Please sign in to comment I'm having the same service station stall issue as the above mentioned. Touching these parts can result in clogs, ink failure, and bad electrical connections. Touching these parts can result in clogs, ink failure, and bad electrical connections.

Hp Deskjet 6980 Power And Resume Lights Blinking

Figure : Close the cover If these steps resolved the issue, you do not need to continue troubleshooting. http://gravitationalpull.net/wp/?p=745 Press the Power button () to turn on the product, if it is not already on. Hp Deskjet 6980 Troubleshooting Guide Clean cotton swabs or any soft, lint-free material that will not stick to the cartridges (coffee filters work well). Hp Deskjet 6980 Network Light Blinking The self-test report prints.

See Installing or replacing the print cartridges.You can still print with one print cartridge. this contact form The carriage moves to the right side of the product. Dip a swab in the clean water, and then squeeze it to remove most of the moisture. Step one: Perform a power reset Press the Power button () to turn on the product. Hp Deskjet 6988 Network Light Flashing

Uploaded on Nov 20, 2010Just the printer I use with my Acer, I originally got this back in 2007 when I had my HP laptop Category Science & Technology License Standard Follow these steps to remove and reinsert the cartridges. Tri-color print cartridge is damaged or missing.Reinstall the print cartridge. have a peek here Dip a swab in the clean water, and then squeeze it to remove most of the moisture.

Figure : Unhook the cartridge latch Slide the cartridge out of its slot. Hp Deskjet 6980 Error Lights Touching these parts can result in clogs, ink failure, and bad electrical connections. http://www.printcountry.com/sitemap.asp ON HIATUS Thanks for stopping by Gravitational Pull.

Step two: Print a self-test report Print a self-test report to make sure that the hardware functions correctly.

The swab should be only slightly damp. Wait until the warm-up period completes before you continue. First Time Here? Hp Deskjet 6980 Wireless Setup Printer is turned on and idle.No action required.

Reattach the duplexer with the small paper tray to the rear of the product, and make sure that it snaps into place. Press down lightly on top of the cartridge latch, and then pull up the latch to unhook it. Wait until the product is idle and silent before continuing. Check This Out The Power light blinks while the product receives the data.

The carriage moves to the right side of the product. Any suggestions on what I should do? NOTE: The product might go through a warm-up period which might last up to two minutes. See Printing with a single print cartridge.

Figure : Open the cover Press down lightly on top of the cartridge latch, and then pull up the latch to unhook it.