Home > Hp Deskjet > Hp Deskjet 6940 Troubleshooting Guide

Hp Deskjet 6940 Troubleshooting Guide

Contents

Loading... The carriage moves to the right side of the product. Sometimes, overnight drying [with the cartridge loaded IN the printer is required]. Do not leave a cartridge outside the product for more than 30 minutes. Source

Figure 117: Close the cover Issue: The Power light and the Resume light blink In this error condition, the following light pattern displays on the control panel: Power light: Blinking Resume Cheers. Figure 26: Do not touch the electrical contacts or the ink nozzles on the cartridge Hold the cartridge by its sides with the nozzles toward the product, and then insert the Wait until the product is idle and silent before continuing. http://support.hp.com/us-en/document/c00575972

Hp Deskjet 6940 Troubleshooting Guide

Carefully pull the pink pull tab to remove the plastic tape on the cartridge. Wait until the product is idle and silent before continuing. Press the Power button () to turn on the product, if it is not already on. Thank you! Register ยท Log In HP Support Forum Home > Printers > Inkjet > Flashing lights on HP 6940 HP Support Forums Join in the conversation.

Press the Power button () to turn on the product. Press the Power button () to turn the product on. NOTE: Clean the contacts quickly so that the print cartridge is not outside of the product for more than 30 minutes. Hp 6940 Printer For Sale Figure : Open the cover Disconnect the power cord from the rear of the product.

Figure : Remove the cartridge caution: Do not remove both cartridges at the same time. Hp Deskjet 6940 Reset Carefully pull the pink pull tab to remove the plastic tape on the cartridge. Follow these steps to clean the paper feed rollers. http://h30434.www3.hp.com/t5/Inkjet-Printing/i-quot-m-having-a-problem-with-my-hp-deskjet-6940-printer/td-p/1686455 Dip a swab in the clean water, and then squeeze it to remove most of the moisture.

Cause: The product has a paper jam. Hp Deskjet 6940 Ink Replacement Wait until the product is idle and silent before continuing. Make sure that the power cord is disconnected from the back of the product. So instead of getting a refurbished one, I found an insane deal on a similar model, the HP Deskjet 6940, that lacks the card reader but still has the photo-printing capability

Hp Deskjet 6940 Reset

Step two: Print a self-test report Print a self-test report to make sure that the hardware functions correctly. http://gravitationalpull.net/wp/?p=745 Figure : Do not touch the electrical contacts or the ink nozzles on the cartridge Hold the cartridge by its sides with the nozzles toward the product, and then insert the Hp Deskjet 6940 Troubleshooting Guide Load plain white paper in the input tray. Hp Deskjet 6940 Driver Load plain white paper in the input tray.

If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting. this contact form thanks for any help. Figure : Remove any clear protective tape from the nozzles Hold the cartridge by its sides with the nozzles toward the product, and then insert the cartridge into its slot. Cartridges do not need to be replaced until print quality becomes unacceptable. Hp Deskjet 6940 Clean Print Heads

Reach inside the product, and then manually move the carriage. Issue: The Resume light blinks and a message might display on the computer In this error condition, the following light pattern displays on the control panel: Power light: On Resume light: To view the following movie you must have the Flash Player installed on your system. have a peek here Press the cloth against the rollers and rotate them upwards with your fingers to clean them all the way around.

Taryn · 9 years ago 0 Thumbs up 0 Thumbs down Comment Add a comment Submit · just now Report Abuse This Site Might Help You. Hp Deskjet 6940 Windows 10 Figure 16: Unhook the cartridge latch Slide the cartridge out of its slot. The self-test report prints.

Open the product cover.

Solution one: Remove, inspect, and reseat the cartridges The cartridge might not have full electrical contact with the product. Rating is available when the video has been rented. CAUTION: Do not remove jammed paper at this stage. Hp Deskjet 6940 Ink Levels Figure 82: Open the door on the duplexer Gently pull out any paper from inside the duplexer, and then close the door on the duplexer.

Figure : Open the cover Disconnect the power cord from the rear of the product. Press and hold the Print Cancel button (). Remove the cartridges from the printer, and unplug the cables from the back of the printer. Check This Out Press the Power button () to turn on the product.

Figure 89: Reattach the rear access door Reconnect the power cord to the rear of the product. Disconnect the power cord from the rear of the product. Open the product cover. If that's the case, call HP at 1-800-474-6836 to find out the repair/replacement options.

To resolve the issue, find the message that displays on your computer (from the following choices), and then expand that section for solutions. The self-test report prints. The swab should be only slightly damp. Press the two latch handles on the rear access door toward each other, and then pull the door out to remove it.

Solution six: Service the printer If you have completed all the steps listed above and are still experiencing a problem, continue to the Service the printer section at the end of Reattach the rear access door to the rear of the product and make sure that it snaps into place. Solution five: Plug the printer directly into a wall outlet Plug the product directly into a wall outlet to make sure that the power source functions correctly. The copper-conductors {strips} on the cartridge and in the printer must be clean - even a fingerprint can cause communication problems.

If the carriage is stuck on the right side, move the carriage to the left side of the product. Step two: Clear a paper jam from the rear of the printer Choose from the following three methods to check for and clear any jammed paper from the rear of the Solutions IMPORTANT: You must follow these solutions in the order presented to resolve the issue. As you have at least two Tri-Color cartridges - when the printer problem is solved - be sure to store the other cartridge in a vertical position {To avoid "Cross-Conramination" of