Home > Hp Deskjet > Hp Deskjet 6940 Not Printing

Hp Deskjet 6940 Not Printing

Contents

If the carriage is stuck in the middle, move the carriage to the right. Close the cover on the product. The carriage moves to the right side of the product. Privacy Policy © Copyright 2016 HP Development Company, L.P. Source

Do not leave a cartridge outside the product for more than 30 minutes. Close the door on the duplexer, and then secure the lever on the small paper tray to hold the duplexer door in place. Press down lightly on top of the cartridge latch, and then pull up the latch to unhook it. Press and hold the Print Cancel button (). http://support.hp.com/us-en/document/c00575972

Hp Deskjet 6940 Not Printing

With the product turned on, disconnect the power cord from the rear of the product. Press the two latch handles on the rear access door toward each other, and then pull the door out to remove it. Make sure that the power cord is disconnected from the back of the product. follow this link..

Reattach the duplexer with the small paper tray to the rear of the product, and make sure that it snaps into place. Press down lightly on top of the cartridge latch, and then pull up the latch to unhook it. Figure : Open the cover Press down lightly on top of the cartridge latch, and then pull up the latch to unhook it. Hp Deskjet 6940 Clean Print Heads If the carriage is stuck on the left side, move the carriage to the right side of the product.

The self-test report prints. Solution one: Clean the cartridge contacts Follow these steps to clean the contacts on the problem cartridge. Gather the following materials: Clean distilled water. More hints Turn on the printer, and then press the Resume button.

Figure : Clean the contacts Copper-colored contacts Ink nozzles (do not clean) Lightly moisten another swab with distilled water, and then squeeze any excess water from the swab. Hp 6940 Printer For Sale If the issue persists, continue with the next solution. Privacy Policy © Copyright 2016 HP Development Company, L.P. If the cartridge is outside of the product for too long, the ink can dry and clog the nozzles.

Hp Deskjet 6940 Ink

Reattach the duplexer to the rear of the product and make sure that it snaps into place. http://support.hp.com/us-en/document/c01065334 Figure : Remove the cartridge caution: Do not remove both cartridges at the same time. Hp Deskjet 6940 Not Printing The carriage moves to the right side of the product. Hp Deskjet 6940 Driver Figure : Close the cover Issue: The Power light and the Resume light blink In this error condition, the following light pattern displays on the control panel: Power light: Blinking Resume

Figure : Open the cover Gently pull out any jammed paper from inside the product. this contact form Follow these steps to remove and then reinsert the cartridges. Allow the contacts to dry for approximately 10 minutes, or use a new swab to dry the contacts. Remove the rear access door. Hp Deskjet 6940 Reset

Figure : Open the cover Press down lightly on top of the cartridge latch, and then pull up the latch to unhook it. HP Solution Center opens. Solution Follow these steps in the order presented to resolve the issue. have a peek here Hold the cartridge by its sides with the nozzles toward the product, and then insert the cartridge into its slot.

Press the Power button () to turn on the product. Hp Deskjet 6940 Ink Replacement Cause: One or both of the cartridges is missing, or the cartridges do not have full electrical contact with the product. http://itech-softblog.blogspot.in/2014/02/hp-printer-install-wizard-for-windows.html ? · 3 years ago 0 Thumbs up 0 Thumbs down Comment Add a comment Submit · just now Report Abuse It's possible definitely mariana · 4 weeks ago 0

Figure : Close the cartridge latch Repeat these steps to clean the contacts on the other cartridge.

Gather the following materials: Clean distilled water. How to print a self-test report Load plain white paper in the input tray. Open the product cover. Hp Deskjet 6940 Windows 10 If the issue persists, continue with the next solution.

Press down lightly on top of the cartridge latch, and then pull up the latch to unhook it. Follow these steps to remove and reinstall the cartridges. Use bottled or filtered water if distilled water is not available. Check This Out Press and hold the Print Cancel button ().

This appears to be a network related problem. How to print a self-test report Load plain white paper in the input tray. Source(s): hp 6940 printer problems: https://biturl.im/cdPD4 Ogdon · 1 year ago 0 Thumbs up 0 Thumbs down Comment Add a comment Submit · just now Report Abuse Hp Deskjet 6940 Ink Repair fees might apply for out-of-warranty products.

Make sure that the icon on the cartridge matches the icon on the slot. Tilt the small paper tray forward and then open the lower door of the accessory. 1 - Tilting the small paper tray 2 - Opening the lower door Remove any paper Disconnect the power cord from any power strip or surge suppressor, and then plug it directly into the wall outlet. Press and hold the Print Cancel button ().

Use the swab to clean the electrical contacts in the carriage, located inside the product. If the issue persists, continue with the next solution. what can i do? Figure : Remove the cartridge Repeat these steps to remove the other cartridge.

Removing jammed paper incorrectly can damage the printing mechanism. Press the Power button () to turn on the product, if it is not already turned on. Make sure that no clear protective tape remains on the contacts or nozzles. Figure : Unhook the cartridge latch Slide the cartridge out of its slot.

Touching these parts can result in clogs, ink failure, and bad electrical connections. Step one: Remove any loose paper from the tray Remove any loose sheets of paper from the input tray and the output tray. Solutions Try the following solutions in the order presented to resolve the issue. Reconnect the power cord to the rear of the product.

Search the Community Entire ForumThis CategoryThis BoardUsers turn on suggested results Auto-suggest helps you quickly narrow down your search results by suggesting Figure : Close the cartridge latch Repeat these steps to replace the other cartridge, if necessary. Issue: The Power light blinks In this normal condition, the following light pattern displays on the control panel: Power light: Blinking Resume light: Off Network light: Off or on, depending on