Home > Hp Deskjet > Hp Compaq Red Light 5 Beeps

Hp Compaq Red Light 5 Beeps

Contents

Bob Headrick, HP ExpertI am not an employee of HP, I am a volunteer posting here on my own time.If your problem is solved please click the "Accept as Solution" button------------VIf If the paper tears, part of it might remain inside the paper path and damage the product. Figure : Remove the output tray Move the paper width guide and the paper length guide to their outermost positions. Make sure you reinsert the memory modules.You can Google to see how to reapply the thermal paste.Hope this helps. _____________________________________________Please click the White Kudos star on the left, to say thanks.Please http://permamatrix.net/hp-deskjet/hp-deskjet-5550-blinking-ink-light.html

If the issue persists, continue to the next solution. If the carriage is stuck on the left side of the product, move the carriage to the right side of the product. If so, allow the carriage to move to that position. Solution one: Load paper Lift the output tray. read review

Hp Compaq Red Light 5 Beeps

Check to see if the 5v_aux light on the system board is turned on. If the test page does not print, continue with the next solution. Solution five: Service the printer If you have completed all the solutions listed above and are still experiencing a problem, continue to the Service the printer section at the end of Solutions Follow these solutions in the order presented to resolve the issue.

If the issue persists, continue with the next solution. Remove any obstructions from under and around the carriage. Under Type Is list, select the paper type that matches the paper you are printing on. Hp Deskjet 5150 Troubleshooting One icon is lit, and another icon blinks The lit icon indicates the print quality setting for the current print job in the queue.

The product lights might flash and the carriage might move. Hp Beep Codes Search all support All Support Software, Drivers and Updates Troubleshooting How to Product Information User Guides Cancel Example: “Laserjet P1102w driver” or “HP Pavilion 17-f002na will not turn on” Loading Results Figure : Do not touch the contacts or ink nozzles Repeat the previous steps to remove the other cartridge. i thought about this Blinking lights can indicate that the product requires maintenance, or that the product is in an error state.

First Time Here? Hp Support Usually this is associated with downloading an application that contains spyware, by not having browser security options large enough, by carelessly downloading P2P files, or by failing to install security patches Red Power LED flashes three times, once every second, followed by a two-second pause. If you fail to find a solution, use the BC forums to obtain assistance.

Hp Beep Codes

Unplug the power cord from the power strip or surge protector, and then plug it directly into the wall outlet. http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Red-Flashing-light-on-an-HP-DX5150-desktop/td-p/1979433 How to print a self-test report Load plain paper in the paper tray. Hp Compaq Red Light 5 Beeps Open the top cover. Hp Deskjet 5150 Won't Print If the issue persists, continue with the next solution.

Solution four: Replace the cartridges Follow these steps to replace the cartridges. http://permamatrix.net/hp-deskjet/hp-deskjet-932c-troubleshooting-blinking-light.html If this does not correct the problem, move onto Section 2.Step 1Turn on the printer and open the cover where the ink cartridge is located. Figure : Raise the cartridge latch Slide a cartridge out of its slot, and then pull it toward you to remove it. Figure : Reinsert the cartridge Press the cartridge latch down until it snaps firmly into place. Hp Deskjet 5650 Troubleshooting

If it is turned on, then replace the power button harness. Solution Follow these steps to replace a defective cartridge. Reseat the processor. http://permamatrix.net/hp-deskjet/hp-deskjet-f2180-ink-light-flashing.html caution: Use a flashlight to thoroughly check the rollers and wheels for torn pieces of paper that might remain inside the product.

caution: Do not remove jammed paper yet. Solution Use this guide to review Print Quality icon light patterns: Icon light pattern Print quality setting One icon is lit Indicates the print quality setting that is currently selected. Reattach the rear access door.

Proper voltage setting depends on your region.

Replace the system board. Uncontrolled Applications Step 4. Wait 15 seconds. Close the top cover.

If the issue persists, continue to the next solution. Press and hold the Power button. Figure : Reattach the rear access door Reconnect the power cord to the rear of the product. Check This Out Solution one: Reset the printer Follow these steps to perform a product reset.

Proceed to the next step to insert a replacement cartridge. If the carriage is stuck on the right side of the product, move the carriage to the left side of the product. Showing results for  Search instead for  Do you mean  or Post new question Question Reply Topic Options Subscribe Mark Topic as New Mark Topic as Read Float this Topic to the Figure : Clean the paper rollers Allow the rollers to dry for 10 to 15 minutes.

Close the top cover. Issue: The Print Cartridge light is on In this error condition, the following light pattern displays on the control panel: Print Cartridge status light: On Resume light: Off Print Quality icon If the 5v_aux light on the system board is not turned on, then replace the power supply. Figure : Remove protective tape caution: Do not touch the copper-colored contacts or the ink nozzles.

The carriage might try to move into the access area. The calibration page prints. Figure : Raise the cartridge latches Slide the cartridge out of its slot, and then pull it towards you to remove it. note: The product might go through a warm-up period of up to two minutes.

Z7_3054ICK0KGTE30AQO5O3KA3016 hp-feedback-input-portlet Actions ${title} Loading... Issue: The Resume light is blinking when printing in FastDraft Mode In this error condition, the following light pattern displays on the control panel: Print Cartridge status light: Off Resume light: Around The HomeEntertainmentProductivitySmart HomeFamilyParentingToysPetsTravelProduct ReviewsPhonesTabletsLaptopsDesktopsWearablesAudioCamerasHeadphonesPrintersSmart HomeTVsGaming and VideoOne Cool ThingPodcastFrugal TechKickstartersVideosTechwalla Articles ProductsHomearound the homeproductivityHow to Clear an HP Check Printer Cartridge Error CodeHow to Clear an HP Check Printer Cartridge Touching these parts can result in clogs, ink failure, and bad electrical connections.

Usually, your personal computer runs best while the system is just installed and the devices are still fresh. If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting. Follow The Instruction to Free Myself from It.Is It Possible to Correct 0X000000d1 Ndis Sys Windows Very Quickly?Getting over Softwares Pc by SmartPCFixer.Settling Provider Type As Registered Is Invalid. The Power LED will continue flashing until the problem is resolved. 4 Power failure (power supply is overloaded).

Use both hands to pull any whole sheets of paper to avoid tearing them. Press the Power button () to turn on the product. See the documentation that came with the HP product for more information. Reattach the rear access door.