Hp Designjet 5500 Service Manual
by franksy on May 5, 2011 at 2:12am Add comment Please sign in to comment Please sign in to comment HP Color LaserJet 5500 Buy discount ink Buy this printer More The mask generation algorithm could not generate the print mask. Recommended action Turn the printer off (using the main power switch on the back of the printer) and remove the network cable from the printer's network card. Upgrade the firmware to the most current version available. Source
Recommended action HP recommends printing via the network card because the transmission time via the parallel port is very slow, which may be causing the error. HP Designjet 5500 From the above location, type copy /b DJ5500_Axxxx.FMW LPT1 (the xxxx refers to the most current firmware revision). Open the folder when prompted, once the download is complete. Hochgeladen am 21.06.2011Explanation of the causes of the 'Check printhead path' error and how to resolve it on the DesignJet 5000 & DesignJet 5500 plotter.For Sales, Service, Repairs, Rentals, Spare parts
Hp Designjet 5500 Service Manual
If the error continues or persists, replace the Lens cover. top System Error 0C1001 (non-continuable) Explanation Primer Shutdown Error. If the error continues, call HP for technical support to troubleshoot the problem. The system returned: (22) Invalid argument The remote host or network may be down.
top System Error 0A0010 (non-continuable) Explanation A problem with the Air Pressurization System (APS) has occurred. In most cases, it is a problem of incorrectly inserted Printhead Cleaners, but it can also be caused by a service station fault. 8 Designjet 5000 / 5500 ffff ffff 036e0136 All necessary files will be installed. Hp 5500 Printhead Problems by dmzcompute on May 18, 2006 at 12:36pm Add comment Please sign in to comment 0 thanks dmz.ithought that may be so, but wanted a second opinion.i will post the result
Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers If the error continues, call HP for technical support to troubleshoot the problem. Following replacement, turn the printer on (entering Service mode as instructed below). http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=83876&docId=emr_na-c00791022&docLocale=en_US top System Error 010030 034c095e Explanation The power supply detects a low spike (e.g.
The actual assemblies are the same part for each color. The error code meanings are as follows: 51.10 points to the Black laser scanner 51.11 points to the Cyan laser scanner Hp Designjet 5000 Service Manual top System Error 0C00FF (non-continuable) Explanation Print Mask could not be generated. Wähle deine Sprache aus. top System Error 0F0200 01E603d2 (non-continuable) Explanation A Parallel Port error has occurred.
Hp Designjet 5500 Printhead Reseat Error
Scroll to Lens Maintenance, and press ENTER. click here now Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. Hp Designjet 5500 Service Manual Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. Hp Designjet 1050c Error Codes If the error re-occurs or the problem persists, turn the printer off and continue with the remaining steps.
Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on. this contact form A 24 or 36-inch roll of media may be cut to 60 or 42 inches long and used for this procedure. Attempt to verify printer functionality. The chance of this error appearing is less than 0.5% and there is nothing wrong with the printer. Hp Designjet 5500 Printhead Error Codes
Recommended action Turn the printer off (using the power switch at the back of the printer), and check for obstructions in the Carriage path (Scan-axis) and remove if found. If no error appears, try to print a file (problem is resolved if printer prints the file with no error). When the READY message is displayed on the front-panel, scroll to the Printer Setup Options icon and press the Enter key. have a peek here This document contains a comprehensive list of various support services available to help solve printer problems.
NOTE: Before troubleshooting System Errors, if possible, repeat the procedure performed when the error was reported. Hp Designjet 5500 Manual Pdf Click here for information on contacting HP Customer Care. When the READY message is displayed on the front-panel, scroll to the Printer Setup Options icon and press ENTER.
It happens normally in new printers and only once (it is unlikely to happen again).
If the tube is not connected (blue end only), re-connect as needed; also eliminate all kinks noticed in the tube. top System Error 0B000D (non-continuable) Explanation Serial Device ADC test failure. The possible causes are either fibers or paper in the drop-detect sensor, or that the scan-axis reference is incorrect. Hp Laserjet 5500 Error Codes Engage the locking tabs to secure the DIMM(s).
If problems persist, continue with the remaining steps. If the error immediately re-appears call HP for technical support. Recommended action Turn the printer off (using the power switch at the back of the printer), wait 20 minutes and turn the printer on (condensation may be causing error and the http://permamatrix.net/hp-designjet/hp-designjet-1050c-service-manual.html top System Error 050000 (continuable) Explanation The Lens is having problems reading the Mark Encoder on the Drive roller.
The 60-inch models require 60-inch wide media, and the 42-inch models require 42-inch wide media.