Home > Hp Designjet > Hp Designjet 5500 Printer Manual

Hp Designjet 5500 Printer Manual

Contents

Select YES to replace printheads or select NO to finish print job without the failed printhead (print quality is affected). HP Designjet 5500 From the above location, type copy /b DJ5500_Axxxx.FMW LPT1 (the xxxx refers to the most current firmware revision). Using the Arrow keys, scroll to Utilities and press Enter. Hochgeladen am 21.06.2011Explanation of the causes of the 'Check printhead path' error and how to resolve it on the DesignJet 5000 & DesignJet 5500 plotter.For Sales, Service, Repairs, Rentals, Spare parts Source

If the error immediately re-appears call HP for technical support. If the error continues, call HP for technical support to troubleshoot the problem. Follow the printer's front-panel instructions to replace the Lens cover (extra Lens covers are included in the Maintenance kit shipped with the printer). Turn the printer on. read review

Hp Designjet 5500 Printer Manual

If the error continues, call HP for technical support to troubleshoot the problem. If the issue is unresolved, click here to contact HP support (http://thenew.hp.com/country/us/eng/contact_us.html) and provide the following information: Document number bpp03890 used for troubleshooting and a brief problem description to assist HP Bitte versuche es sp├Ąter erneut.

If the error re-appears, continue with the remaining steps. Status Numbers Printhead Cleaner Error Description Procedure *X03 Replace There is a printhead cleaner detection failure (it is all right to continue to use the printhead cleaner) Try the following tasks: top System Error 0C0040 (non-continuable) Explanation An Error has occurred in the Printhead Drop Detection. Hp Designjet 5500 Printhead Reseat Error If the error continues, call HP for technical support to troubleshoot the problem.

Click here for information on contacting HP Customer Care. Hp Designjet 5500 Printer Driver Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers Turn the printer off, wait 15 seconds and turn the printer on. http://h20564.www2.hp.com/portal/site/hpsc/public/psi/troubleshootResults?sp4ts.oid=82218 Turn the printer on; if the error continues, call HP for technical support to troubleshoot the problem.

Any special equipment or software (for example, spoolers, networks, switch-boxes, modems, or special software drivers). Hp Designjet 5500 Price If the error re-appears, call HP for technical support to troubleshoot the problem. If the error continues after replacing the lens cover, call HP for technical support to troubleshoot the problem. Recommended action Turn the printer off (using the power switch at the back of the printer), wait 15 seconds and turn the printer on.

Hp Designjet 5500 Printer Driver

If the issue is unresolved, click here to contact HP support (http://thenew.hp.com/country/us/eng/contact_us.html) and provide the following information: Document number bpp03891 used for troubleshooting and a brief problem description to assist HP http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpp03891 The update process sends a special file to the printer. Hp Designjet 5500 Printer Manual Check the empty slots to see if they need cleaning. Hp Designjet 5500 Error Codes When the READY message is displayed on the front-panel, scroll to the Printer Setup Options icon and press the Enter key.

Verify that the printhead color is correct for the slot. http://permamatrix.net/hp-designjet/hp-designjet-5500-error-codes.html If problems persist, continue with the remaining steps. If no error occurs, plug the network cable back into the network card and attempt to print (problem may have been caused by receiving information through the port during the power Wird geladen... Hp Designjet 5500 Error 1f50007

top Status messages The messages in Table 1 provide only an action to perform: Status Description Procedure OK The ink system is working correctly. If this error appears, all settings related to the heater will disappear from the front panel. 47 Designjet 5000 / 5500 0C0030 error Drop detect failure 48 Designjet 5000 / 5500 If the error continues, call HP for technical support to troubleshoot the problem. http://permamatrix.net/hp-designjet/hp-designjet-5500-error.html Plug in the network cable (if not already plugged in).

Click here for information on contacting HP Customer Care. Hp Designjet 5500 Specs On the printer's front panel, scroll to the Cartridges menu. Type cd Hewlett-Packard, and press Enter.

Transkript Das interaktive Transkript konnte nicht geladen werden.

top System Error 0C1000 (non-continuable) Explanation The primer is not calibrated or the calibration settings have been lost. NOTE: Do not open the printers window until the messages above are displayed on the front panel. If the error persists, call HP for technical support to troubleshoot the problem. Hp Designjet 5500 Ink If an External RIP is being used, verify printer functionality by using the HP driver (HP-GL/2 or PostScript).

Printhead quality degrading. Click here for instructions on how to upgrade the printer's firmware . If the error continues after replacing the lens cover, call HP for technical support to troubleshoot the problem. Check This Out The error code should not appear again.

Open a DOS session by clicking Start, Programs, Command Prompt/MS DOS. Scroll to Test Print and press Enter. Click here for information on contacting HP Customer Care. If no error appears, attempt to verify printer functionality.

The type of computer connected to the printer. If the error continues, call HP for technical support to troubleshoot the problem. Recommended action Turn the printer off (using the power switch at the back of the printer), and check for obstructions in the Carriage path (Scan-axis) and remove if found. top Replacing the lens cover To replace the lens cover, follow the instructions below: Using the Arrow keys on the printer's front panel, scroll to the Printer setup menu (icon of

Continuable and non-continuable error codes Some error codes are continuable, which means that it is possible to press ENTER on the front panel and continue working with the printer. Open the cover on the back of the printer to access the ink cartridge assembly (right side of the printer, looking from the back). Select Upgrade. Figure 4: Releasing locking tabs 1 - Lower locking tab 2 - Upper locking tab Remove the memory, taking care not to drop the DIMM(s).

If no error appears, try to print a file (problem is resolved if printer prints the file with no error). Turn the printer off using the main power switch at the back of the printer. Click here for information on contacting HP Customer Care.