Home > Hp Designjet > Hp Designjet 500 Printhead Cleaning

Hp Designjet 500 Printhead Cleaning

Contents

Refer to pages 8-5, 8-6, 8-24, 8-25, and 8-26 of the HP Designjet 500/800 Series Service Manual for instructions.Following replacement, turn the printer on.Allow the printer to complete initialization and verify Results vary, depending on the print quality setting being used. by dmzcompute on Sep 12, 2013 at 4:51am Add comment Please sign in to comment 0 I removed the regular printheads and I put setup heads as you said but the by dmzcompute on Sep 12, 2013 at 8:42pm Add comment Please sign in to comment 0 I have with me the setup heads, when I do what you say just the Source

Diese Funktion ist zurzeit nicht verfügbar. Keep in mind turning off with the power button in front is like turning off a tv set. Arrows on the cartridges point towards the front of the printer, as shown in Figure 2.3. One other item which is rare is the cover open switch on the plotter.

Hp Designjet 500 Printhead Cleaning

Plug it back in and turn on again. Anmelden Dieses Video gefällt dir nicht? Anmelden 7 Wird geladen...

There seems to be a language issue so without clear information it is very hard to help you. Melde dich bei YouTube an, damit dein Feedback gezählt wird. Generated Sun, 16 Oct 2016 08:26:07 GMT by s_ac5 (squid/3.5.20) Hp Designjet 500 Not Recognising Ink Cartridges There can be NO contact between the back side of the printhead and the contacts on the carriage assembly.

Try sending a different file. Hp 11 Printhead If assistance is needed, please refer to the computer’s documentation or technical support. Du kannst diese Einstellung unten ändern. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpp03062 Repeat the process from step 1 for the other Printheads to identify which Printhead is failing.

There can be NO contact between the back side of the printhead and the contacts on the carriage assembly. Designjet 500 Cartridges Send the Troubleshooting Print. Send a test print from the printer driver. If the error persists, go to Step 3.

Hp 11 Printhead

When you do this, the printer will then start the priming procedure and when done will tell you to replace the setup heads with the regular printheads by dmzcompute on Sep

Uninstall and reinstall the printer driver (install the most current version available). Hp Designjet 500 Printhead Cleaning However it is still asking for the starter print heads to complete the priming procedure. Hp Designjet 500 Printhead Set Now the one thing you have not answered is if the cover open switch is working.

Send the Troubleshooting Print. this contact form Figure 12: Removing the tape Insert a new printhead, ensuring that the colored label on the printhead corresponds to that on the printhead slot, as shown in Figure 4.2. Wird verarbeitet... From the front panel message of Ready, highlight the Printer icon, and press ENTER. Hp Designjet 500 Printhead Alignment Error

Anmelden 44 6 Dieses Video gefällt dir nicht? Setup heads are a plain plastic with no markings for color, etc. I have tried replacing the cartridges, cleaning the contacts and resetting the EEROM to no avail.This was the original issue and it was preventing me from shutting down the printer; the have a peek here Flashing pump The cartridge is out of ink, and must be replaced before any further printing can be done.

You need to follow the steps listed in the service manual with the startup print heads installed. Hp Designjet 800 Printhead Part Number If this is the case, please refer to the documentation or technical support services provided with the other printer. To test, remove the power cable and open the center cover.

Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers

Melde dich an, um dieses Video zur Playlist "Später ansehen" hinzuzufügen. If print quality is poor, the first step should always be to perform the Troubleshooting procedure, which uses various levels of recovery actions to determine whether the Printhead needs replacing. Nächstes Video HP 940 (C4900) printhead disassembly, check and cleaning - Dauer: 19:31 slusser manner 160.059 Aufrufe 19:31 Как сделать чистку и восстановление печатающей головки HP 11 для плоттера. - Dauer: Hp Designjet 500 Printhead Cover Error No idea what you mean by changed the truck.

Close the carriage cover and the center cover and see what happens. WiedergabelisteWarteschlangeWiedergabelisteWarteschlange Alle entfernenBeenden Wird geladen... Melde dich an, um unangemessene Inhalte zu melden. Check This Out top Unexplained 79:04 error on boot up (printer isolated) Third party ink supplies (printheads or cartridges) can commonly cause unexplained 79:04 errors.

This can take several minutes. Figure 1: An ink cartridge Figure 2: A printhead The printheads, as shown in Figure 1.2, are the components that place minute droplets of ink onto the paper. Wird geladen... Close the ink cartridge cover.

Refer to pages 8-7, 8-8, 8-48, and 8-49 of the 500/800 Series Service Manual for instructions. See section five below: “Aligning printheads." top Section 5: Aligning printheads The printhead alignment procedure requires paper to be loaded, and will take several minutes to perform. If the error reappears, try generating the file again and try to print. Restore password × Upload manual upload from disk upload from url Thank you for your help!

Figure 4: Opening the ink cartridge cover Remove the ink cartridge, as shown in Figure 2.2. In other words setup heads do not have any electrical connections on them so placing the tape on the real heads makes them like setup heads.