Home > Hp Designjet > Hp Designjet 4000 Service Manual

Hp Designjet 4000 Service Manual

Contents

Remove three T-15 screws (Type G) that secure the Rear Door. When removing the screws, please be very careful NOT to damage the Encoder Strip. 8-24 hp designjet 4000 series printer service manual... Designjet 4000, 4020 Error 53:10 Media Sensor Failure. Laser Printer Services provides free cleaning on HP Design-Jet plotter repair with 6 months warranty on all replacement parts. Source

Page 91: Electronics Module Test Use UP and DOWN keys to select If you select Yes, the printer will get the CPU information and display the information on the Front Panel. Designjet 4000, 4020 Error 26.1:01 Bad Contact Detected In ISS Slot 1 Floater. We keep your design jet 4000/4000ps plotter printing trouble free with regular service, or if you are having hardware failures due to network setting or plotter driver. top Error 64:04 Short message Restart the printer.

Hp Designjet 4000 Service Manual

Check also System Error Code 13.n:10 (refer to Page 2-7). 26 Once the test is completed, OK will be displayed on the Front Panel. 4-26 hp designjet 4000 series printer service Disconnect the two Ink Supply Station cables from the PrintMech PCA. 7. victo420 28,915 views 10:16 HP Z3100 24 Inch Printer Rubber Drive Belt Replacement Kit Installation - Duration: 50:04. Request a repair estimate Designjet 4000 – 63:04 error Input/Output Problem Through The Network Card Designjet 4000 – 64:04 error Input/Output Problem Through The USB Port Designjet 4000 – 65:04 error

Remove the Window from the Printer. Click here for information on contacting HP support at http://h20000.www2.hp.com/bizsupport/TechSupport/CallHP.jsp?locale=en_US&docIndexId=179680&taskId=101&prodTypeId=18972&prodSeriesId=25301. Check also System Error Code 07:10 (refer to Page 2-6). 13 Once the test is completed, OK will be displayed on the Front Panel. 4-31 hp designjet 4000 series printer service Gamut Pci Pca Access the printheads.

Page 188 „ „ „ „ „... Hp Designjet T2500 Error Codes If problem persists, call HP support. top System Error 26.0:01 Explanation Bad contact detected in ISS slot 0 floater. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00271379&sp4ts.oid=431014 Page 249 Ink Supply Tubes.

top System Error 27:03 Explanation An error has occurred in Printhead detection. Bob Wert 70,406 views 49:42 Plotter HP L25 500 Erro 86:01 - Duration: 4:38. Check that the printer has the latest firmware version. Wipe the electrical contacts by inserting the tool between the electrical connections at the back of the slot and the steel spring with the sponge facing away from you and towards

Hp Designjet T2500 Error Codes

Release the Ink Supply Tubes and Trailing Cable from the clip underneath the Top Cover. 5. Check that the printer has the latest firmware version. Hp Designjet 4000 Service Manual If the error continues, call HP for support. Hp Latex 360 Error Codes Page 135: Reset Life Counters Life Counter of the: – Scan-Axis Motor. – Trailing Cable and Tubes. – Carriage Belt. – Carriage (Bushing). – Most Left Spittoon. – Middle Left Spittoon.

Page 103 If the PHC Access Door Sensor fails the test, the Front Panel will display System Error Code 51.1:10. this contact form Loading... Page 130: Prime Tubes Enter key, in which case the Printer will reboot. Wait 15 seconds and reconnect the power cable and turn the printer on. "hp Designjet 4000" Printhead Cleaner

Open the Window and check for any visible obstacles restricting the movement of the Carriage Assembly. Design jet 4000, 4020 Error 93:11 Unable to pressurize the IDS. If the error continues, call HP for support. http://permamatrix.net/hp-designjet/hp-designjet-1050c-service-manual.html Remove two T-20 screws (Type B) from the Right Connector Cover. 3.

Wait 15 seconds and reconnect the power cable and turn the printer on. If not, update the Firmware to the latest version. Page 156 Front Panel.

If the error continues, call HP for support.

Remove the Left Cover from the Printer. 8-10 hp designjet 4000 series printer service manual... Remove a new pre-moistened replacement sponge from its pouch. Non-contain DESIGNJET 4000/4500/4520 Error-Codes DESIGN JET 4000/4500/4520 NUMERIAL ERROR CODE DESCRIPTION Designjet 4000, 4020 Error 01.0:03 Error Impact 12C Channel. Click here for information on contacting HP support at http://h20000.www2.hp.com/bizsupport/TechSupport/CallHP.jsp?locale=en_US&docIndexId=179680&taskId=101&prodTypeId=18972&prodSeriesId=25301.

Page 118: Eerom Reset Restoring tubes state. NOTE: It is important to follow the instructions on the Front Panel before putting the Ink Cartridges in place. If not, update the firmware to the latest version. Check This Out Page 252: Right Connector Cover Switch off the product and remove the power cable. 1.

Page 141 If any of the Printhead ink short thresholds cannot be reset or if the Printheads info cannot be accessed, it could point to a possible Firmware error. 4 If Page 42 Printhead Cleaner is correctly seated in slot 6 of the Service Station and then close the Printhead Cleaner Access Door. Page 32: System Error Codes If the Error Code reappears, then the Printer requires an on-site visit in order to resolve the problem. Replace the Black Printhead Cleaner in slot 6 of the Service Station. 2-12 hp designjet 4000 series printer service manual...

Recommended action Try the following: Turn the printer off (using the power switch at the back of the printer), and disconnect the power cable. Remove one T-8 screw (Type K) that secures the Drop Detector to the Service Station. 8-31 hp designjet 4000 series printer service manual... If the error continues, call HP for support.