Home > Error Codes > Hp Laserjet 4250n 49.4c02 Service Error

Hp Laserjet 4250n 49.4c02 Service Error

Contents

It causes static electricity, which can, in turn, cause paper jams. Make sure the bottom tab on the cover fits into the corresponding slot in the printer. and may not be used without advance written permission of PrinterTechs.com, Inc. top 13.06 and 13.12 JAM INSIDE REAR DOOR Description Paper jam inside or outside the rear door of the printer. http://permamatrix.net/error-codes/hp-laserjet-5100-error-codes.html

Action Check for a loose cable connection and make sure to use a high-quality cable. The menu map will print out. Print a Configuration page and check the printer settings to determine which values have changed. (To print a Configuration page, open the Information menu at the printer control panel and scroll The ON setting causes the message to appear on the printer control panel display, and the printer goes offline for 10 seconds, before returning online if an error occurs that prevents

Hp Laserjet 4250n 49.4c02 Service Error

top 51.XY PRINTER ERROR For help press ? Hold the DIMM with your fingers against the side edges and thumbs against the back edge. Turn the printer power off, remove the EIO accessory from slot [X], install it in a different EIO slot, and then turn the printer power on.

Turn the printer off and then on. Reinstall all paper input trays. The page just stops right before the fusor or right after it enters the fusor. Hp Printer Error Codes List Action NOTE: Press the ? (help) button for detailed information about clearing the jam.

Melde dich bei YouTube an, damit dein Feedback gezählt wird. Hp Laserjet 4250 Troubleshooting Pro Slate 12) OR Browse all HP products Please wait while we process your request. Diese Funktion ist zurzeit nicht verfügbar. https://www.laserzone123.com/4250-error-codes.html Remove the print cartridge and check the paper path for paper.

by Anonymous on Mar 19, 2007 at 9:12am Add comment Please sign in to comment 0 Thanks, I tried that and it didn't work. 49.4c02 Error Hp 4250 Check the configuration of the EIO (HP Jetdirect card) and the host computer. What can cause this mistake 62. 02? Reconnect all cables that connect the printer to the network or computer.

Hp Laserjet 4250 Troubleshooting

To reach the settings, open the Configure Device menu at the printer control panel. https://www.orionmarket.com/product_error_page/HP/hp-4250/ NOTE: Avoid spilling loose toner. Hp Laserjet 4250n 49.4c02 Service Error X Description 0- Scanner error 1- Scanner startup error 2- Scanner rotation error Action Press the (Select) button to continue. Hp Laserjet 4200 Error Codes Like any printers, the HP LaserJet 4250 has several printer error codes.

laser 4250 blunder 57. 7 The cooling fan from the discretionary duplexer is just not working HP laserjet 4250 blunder 58. 2 Atmosphere temperature sensor blunder HP laser 4250 blunder 58. http://permamatrix.net/error-codes/hp-laserjet-600-m602-error-codes.html If loose toner falls into the printer, it might cause temporary problems with print quality. Make sure it locks into place. top 49.24.02 PRINTER ERROR Description The printer has experienced a critical error. Hp 4250 Tray 2 Lift Motor

Figure 61: Sealing tab on end of print cartridge 1 - Sealing tab bent and removed from end of print cartridge CAUTION: Avoid touching any black toner on the tape. Description The paper that is loaded in the tray is longer or shorter than the size that is configured for the tray. Action If the incorrect size was selected, cancel the job or press the Help (?) button to gain access to help. http://permamatrix.net/error-codes/general-misprint-error-hp-laserjet.html If the message persists, contact HP Customer Support.

top 54.1 REMOVE THE SEALING TAPE FROM TONER CARTRIDGE Description The toner cartridge was installed with the sealing tape installed. Open the top cover and remove the print cartridge. As a rule when the Network card from the formatter board is broken it'll neglect to print out the "second page".

top 59.XY PRINTER ERROR For help press ?

If the above action does not solve the issue, contact HP or an authorized service provider. Lift the optional duplexer up and then pull it out to remove it. CAUTION: To prevent damage to the print cartridge, do not expose it to light for more than a few minutes. If the sleeve has broken in parts the toner cartridge does not sit exact and the gear does not engage properly.

top 55.X PRINTER ERROR For help press ? Replace a DIMM or EIO device if it is the one that has caused the error. Wenn du bei YouTube angemeldet bist, kannst du dieses Video zu einer Playlist hinzufügen. have a peek here alternates with 59.XY PRINTER ERROR To continue turn off then on Description A temporary printing error occurred.

Wird geladen... top top 40 EIO X BAD TRANSMISSION To continue press (Select) Description The connection has been broken abnormally between the printer and the EIO card (HP Jetdirect card) in the specified top 66.00.15 EXTERNAL DEVICE FAILURE Description The stacker or stapler/stacker was removed and then replaced with the printer power was on. That was only a few months ago so it seems that it shouldn't need to be replaced, unless something is wearing it out real fast.

Figure 8: Sliding the tray out If the edge of the jammed paper is visible in the feed area, slowly pull the paper down and out of the printer. (Do not Figure 32: Inserting the duplexer Open and close the top cover to clear the jam message. Action Open the top cover and remove the print cartridge. by unknown on Oct 23, 2014 at 2:28am Add comment Please sign in to comment 0 What happens if you use tray 2?

top CLEARABLE WARNINGS and AUTO CONTINUE settings Some printer messages are affected by the printer CLEARABLE WARNINGS and AUTO CONTINUE settings. Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers Make sure that the tray is fully inserted into the printer and is not overfilled. Types of messages Status messages Status messages reflect the current state of the printer.

by gregfooyong on Mar 19, 2007 at 8:58am Add comment Please sign in to comment 0 I had a similar phantom paper jam error message.... Figure 50: Pressing DIMM strait into slot Close the DIMM-access door.